In The Box:
D2 gauge assembly, pre-assembled output and oxygen sensor cables with connectors and Bosch LSU4.2 (part# 17014). D2 assembly includes anti-glare faceplate, black bezel, bung and LED display.
B2 gauge assembly, pre-assembled output cables and vacuum hose. B2 assembly includes a black bezel, WHITE or BLACK faceplate and Blue, White, Orange or Red LED display. 10PSI and 60PSI faceplates are sold separately.
WB D2 is featured on Super Street Online
:WB 2 Gauge COMBO D2 Wideband Controller & B2 Boost Gauge
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WB D2 LED Display colors available: BLUE (default), RED, WHITE, ORANGE
WB B2 LED Display colors available: Blue, White, Orange, and Red
Faceplates can be BLACK (default) or WHITE
1 – Less wiring – controller on-board
2 – Simple installation – plug-and-play
3 – One of the four LED color options (Red / Orange / Blue / White) per gauge for four configurable types of fuel (E85, Diesel, Gasoline and Methanol) and lambda display
4 - Sweeping LED "needle" indicator from rich (green) then normal (orange) to lean (red)
5 - Fail safe LOCKED connector - it is not possible to make a wrong connection
6 - Anti-glare faceplate - Non-destructible polycarbonate. Additional faces are paid extra.
7 - Multiple outputs for digital (to PC), analog (to data logger / EMS), narrowband for simulation and extra switch options
8 - On-Gauge Programming Button - No need a PC or tablet for programming upper/lower limits and other settings
1 – Analog 0-5V (9=19 AFR) linear output for engine management systems (EMS) and data loggers (MegaSquirt)
2 – Digital output is 9600 8N1 serial that can be connected to your PC
3 – Simulated NB output
1 – Displays boost in 0.1 PSI (60 PSI max) and to display vacuum in 1 In.Hg (-30 In.Hg max) increments
2 - Sweeping RED LED "needle" boost indicator from o to up to 60 PSI and single BLUE LED vacuum light
3 – Pre-assembled plug and play cable harness with a built-in sensor on the gauge
4 - Black or white faceplate option
5 - Multiple outputs for digital (to PC) and 0-5V analog (to data logger / EMS)
6 - No need a PC or tablet for programming upper/lower limits and other settings
7 – LED display has a daylight sensor to adjust the intensity automatically
Find a vacuum source on the intake manifold side and connect it to the hose fitting provided. If needed, secure the hose with hose clamps or tie zips.